Hunting and Sporting Arms
PlanoHardCase
Plano 48 Inch Rifle Case. You may request to have your rifle shipped in one of these cases for extra protection (OAL of rifle or shotgun must not exceed 48 inches). New.
$30.00
|
00000001
Give a $5.00 Donation to the CSSA. They need our support, and we need them. The CSSA is the voice of the sport shooter and firearms enthusiast in Canada.
$5.00
|
31709
31709- Husqvarna M96 Sporter in 9.3x57. Very good bore with slight frost in front of chamber. D&T with weaver type bases (bases filed). Stock has a couple repaired cracks by toe. Left side of...
$275.00
|
31717
31717- Husqvarna M96 Sporter in 9.3x57. Very good bore with slight frost in front of chamber. Stock has a very small chip in front of ejector box. Shows some handling marks. Overall very good...
$295.00
|
31727
31727- Husqvarna M96 Sporter in 9.3x57. Good shootable bore, slightly dark. Stock chipped behind tang. Shows some handling marks and blue wear. Overall good + condition.
$269.00
|
32089
32089- Husqvarna M96 Sporter in 9.3x57. Very good bore. HVA 1943 dated receiver. Stock cracked and chipped behind tang (chip has filler). Also has a crack by butt. Metal in very good condition.
$275.00
|
32091
32091- Husqvarna M96 Sporter in 9.3x57. Good shootable bore, slightly dark. D&T with weaver bases. Outer metal shows slight surface rust. Stock has a minimal hair crack behind tang. Series of...
$250.00
|
32095
32095- Husqvarna M96 Sporter in 9.3x57. Dark bore. HVA 1942 dated receiver. Outer metal shows very light surface rust and was once painted. Chipped buttplate and big chip at toe. trigger guard...
$225.00
|
32576
32576- Husqvarna 1600 Series in 358 Norma Magnum. Very good bore. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Stock has a crack...
$895.00
|
32638
32638- Husqvarna 1600 Series in 30-06 . Very good bore. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Steel sako type bases. Front...
$469.00
|
32643
32643- Husqvarna 1600 Series in 30-06 . Has a ring in the bore close to muzzle. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Steel...
$369.00
|
32665
32665- Husqvarna 1600 Series in 30-06 . Very good bore. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Forend has a repaired chip....
$449.00
|
32682
32682- Husqvarna 1600 Series in 30-06 . Very good bore with a ring by muzzle. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Steel...
$395.00
|
34027
34027- Husqvarna M96 Sporter in 9.3x57. Good shootable bore, slightly dark. Few holes D&T for scope mount. Rear hump removed. Stock a bit marred next to trigger guard. Shows some handling...
$275.00
|
34033
34033- Husqvarna M96 Sporter in 9.3x57. Very good bore. Trigger guard shows slight surface rust. Shows some handling marks. Overall very good condition.
$395.00
|
34035
34035- Husqvarna M96 Sporter in 9.3x57. Good to very good bore. D&T for scope mount. Bolt handle modified for scope mount. Stock varnish flaking. Shows some handling marks. Overall good +...
$275.00
|
34036
34036- Husqvarna M96 Sporter in 9.3x57. Very good bore. Stock has a small hair crack behind tang. Recoil pad needs proper fitting. Silver name plate on right side of stock. Shows some handling...
$295.00
|
34040
34040- Husqvarna M96 Sporter in 9.3x57. Very good bore. Stock has a crack behind tang that will turn into a chip. Outer metal shows slight remote surface rust. Shows some handling marks. Overall...
$275.00
|
34042
34042- Husqvarna M96 Sporter in 9.3x57. Very good bore. Shows some handling marks and blue wear on trigger guard. Overall very good condition.
$369.00
|
34045
34045- Husqvarna M96 Sporter in 9.3x57. Very good bore. D&T with weaver bases. Outer barrel shows slight surface rust. Underline of stock shows a few notches. Buttplate has a small chip. Shows...
$295.00
|
34482
34482- Viking Arms 1900 in 6.5x55. Very good bore. Weaver bases. Side safety, hinged floorplate. Stock with english style cheek piece and palm swell. Bolt shroud shows a few deep scratches. Shows...
$695.00
|
34539
34539- Husqvarna 1600 Series in 30-06 . Very good bore. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Weaver bases. Steel trigger...
$425.00
|
34549
34549- Husqvarna 1600 Series in 30-06 . Very good bore. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Replacement stock. Outer...
$450.00
|
34552
34552- Husqvarna 1600 Series in 30-06 . Very good bore. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Steel trigger guard, with...
$495.00
|
34553
34553- Husqvarna 1600 Series in 30-06 . Very good bore. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Steel trigger guard shows...
$475.00
|
34554
34554- Husqvarna 1600 Series in 30-06 . Very good bore. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Weaver bases. Added on left...
$475.00
|
34565
34565- Husqvarna 1600 Series in 6.5x55 . Very good bore. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Synthetic stock partially...
$395.00
|
34575
34575- Husqvarna 1600 Series in 30-06 . Very good bore. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Weaver bases. Right side of...
$450.00
|
34577
34577- Husqvarna 1600 Series in 30-06 . Very good bore. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Weaver mount and a 3-9x40...
$425.00
|
34638
34638- Husqvarna 1600 Series in 9.3x62 . Very good bore. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Weaver bases. Stock cracked...
$695.00
|
34639
34639- Husqvarna 1600 Series in 9.3x62. Very good bore. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Previous mount left a few...
$695.00
|
34641
34641- Husqvarna 1600 Series in 9.3x62 . Very good bore. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate. Base screws broken into...
$695.00
|
34654
34654- Husqvarna Commercial FN98 in 8x57. Very good bore. D&T for scope mount. Side safety. Stock has a minimal crack behind tang. Poorly repaired chipped toe. Shows some handling marks and...
$349.00
|
34682
34682- Husqvarna Commercial FN98 in 8x57. Very good bore. Weaver bases. Barrel shortened to 19.5 inches. Stock has a couple cracks by butt. swivels removed. Sights removed. Shows some handling...
$325.00
|
34692
34692- Husqvarna Commercial FN98 in 8x57. Very good bore. Comes with weaver bases and an Aimpoint Mark III scope. Stock has a minimal hair crack behind tang, chipped toe. Shows some handling marks...
$369.00
|
34705
34705- Husqvarna M98 Sporter in 9.3x62. Very good bore. 20 5/8 inch barrel. Threaded muzzle. Picatinny base installed on rear sight base. front sight removed. Chipped buttplate. Stock has a crack...
$495.00
|
34783
34783- Swedish M96 Sporter in 6.5x55. Very good bore. D&T for diopters. Stock notched out for receiver sight. Action bedded. CG63 sporter barrel. Underline of stock once has an accessory rail...
$349.00
|
34796
34796- Swedish M96 Sporter in 6.5x55. Very good bore. Weaver bases. Also D&T for diopters. Bolt handle modified to clear scope with antler piece for a knob and an oversized wing safety. Medium...
$349.00
|
34818
34818- Swedish M96 Sporter in 6.5x55. Very good bore. D&T for side mount. Diopters removed. Bolt handle modified to clear scope. Former CG63. Handguard notched out for a base and missing front...
$349.00
|
36716
36716- Husqvarna 1600 Series in 9.3x62. Very good bore. Features commercial bolt sleeve, factory drilled & tapped for scope mount, side safety, hinged floorplate, steel trigger guard. Weaver...
$795.00
|
